Transport Stream Input Interfaces(Optional) |
DVB-S/S2 Tuner Input | Connector Type: 1×F type female 75Ω for Input 1×F type female 75Ω for loop through output Input Frequency Range: 950~2150MHz Input Level -25~-65dBm Symbol Rate: 5~45MBaud/s for QPSK 10~31MBaud/s for 8PSK Roll Off Factor: DVB-S QPSK: 0.35 DVB-S2 8PSK: 0.35, 0.25, 0.2 FEC Code Rate: DVB-S QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,8/9, 8/10 DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,9/10 LNB Polarity Selection Voltage: 0, 13V, 18V (optional) LNB Band Selection Tone: 0/22KHz selectable Satellite Selection Command: DiSEqC 1.0 |
DVB-C Tuner Input | Connector Type: 1×F type female 75Ω for Input 1×F type female 75Ω for loop through output Input Frequency Range: 48~860MHz Input Level: 45~75dBμV Symbol Rate: 1~7MBaud (ITU J.83 Annex A) Constellation: 16/32/64/128/256QAM Bandwidth: 6MHz, 7MHz, 8MHz Input Return Loss: 7dB (typ.) |
DVB-T Tuner Input | Connector Type: 1×F type female 75Ω for Input 1×F type female 75Ω for loop through output Input Frequency Range: 104~862MHz (VHF/UHF) Input Level: -20~-70dBm (Quasi Error Free, QEF) Constellation: QPSK, 16-QAM, 64-QAM Bandwidth: 6MHz, 7MHz, 8MHz FFT Mode: 2K, 8K Guard Interval: 1/4, 1/8, 1/16, 1/32 FEC Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8 Input Return Loss: 7dB (typ.) |
TS Processing |
| Descrambler DVB Common Scrambling Algorithm(CSA) BISS Mode: BISS-1, BISS-E Common Interface: 2*PCMCIA slots, compatible with major CA CAMs in the market |
Transport Stream Output Interfaces |
ASI Output | Connector type: 2×BNC Female, 75Ω Comply with standard DVB-ASI, EN50083-9 |
Digital Video Decoding |
| Video compression standard : MPEG-2(MP ML for SD,MP HL for HD) MPEG-4 AVC/H.264 Part 10(MPL3 for SD,HP L4.1 for HD) Video PID Bit Rate < 80Mb/s |
Digital Audio Decoding |
| Output Audio channel: 2×digital Audio PIDs are decoded Sampling Rate: 32KHz, 44.1KHz and 48KHz Audio Bit Rate: 32, 64, 96, 128, 160, 192, 224, 256, 288, 320, 352, 384, 416 and 448 kb/s for MPEG-1 Layer I 32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 and 384 kb/s for MPEG-1Layer II |
Video and Audio Outputs |
HD MI Output | Connector: 1×HD MI, 1.3 interface Video Resolution: 1080i×30, 1080i×29.97, 1080i×25, 720p×60, 720p×59.94,720p×50, 480p×60, 576p×50, 576i×25, 480i×29.97 Audio Embedded one digital audio pass through |
Analog Video Output | Connector: 1* YPbPr, RCA interface, 75Ω 1*CVBS, BNC/RCA interface, 75Ω Video Standard: NTSC, PAL, and SECAM YPbPr Resolution: 1080i×30, 1080i×29.97, 1080i×25, 720p×60, 720p×59.94, 720p×50, 480p×60, 576p×50, 576i×25, 480i×29.97 Signal Level: I.0 Vp-p±5% Frequency Response <±I dB, at 5.5 MHz for PAL/SECAM, 4.2MHz for NTSC and 15MHz for HD YPbPr Chroma-Luma Delay <±30 ns Field Time Distortion <2% Line Time Distortion <1% Short Time Distortion <2% Differential Gain <3% Differential Phase <2° Signal to Noise Ratio >55 dB (luminance weighted) |
Analog Audio Output | Connector: 1×XLR Male Socket, 2 pairs of RCA audio Output Impedance: 600Ω (balanced) Output mode: Left, Right, Dual Mono, Stereo Output Audio channel: 2 pairs of stereo audio outputs (2 Audio PIDs are decoded). |
Ancillary Data Processing |
| Subtitle DVB/EBU VBI Teletext, WSS, VFD, VPS Closed Caption EIA 608, EIA 708, EIA 608-to-708 |
General Options |
Control and Monitoring | Connector: 1*RJ-45,10/100 Base-T for NMS Remote control: management via web browser and Proprietary HDMS Local control: management via Front panel and LCD RS-232: for debug use only Software upgraded by USB or FTP loader |
Physical and Power | Voltage: 90~260VAC, 50/60Hz Consumption: 24W Operating temperature: 0~45°C Storage temperature -10~60°C Operating Humidity 10~90%, (non-condensing) Dimensions: 483(W)mm*255 (L)mm*45mm(H) Weight: 4Kg |